Professional Monitoring for any Studio
The C Series studio monitor helps you track, monitor, and mix with confidence by providing accurate sound and dynamic acoustic control. Equipped with a 5”6”8” woven Kevlar low-frequency driver and 1” natural silk dome tweeter, the C Series delivers a flat frequency response, enhanced stereo imaging, and increased clarity for authentic mixing in a space-saving design. The bi-amplified 80 Watt Class A/B amplification means high power with less noise and ensures that your monitoring setup can handle today's modern music with ease. With the C Series, your music is ready for any listening environment.
Sweeter Sweet Spot
The tweeter’s waveguide has been enhanced to provide an expansive sweet spot and superior stereo imaging. A wider mix position gives you professional monitoring for any caliber studio. Pinhole-mounted LED placement cues help locate and light up the sweet spot to ensure a speaker placement that reliably translates stereo information and frequencies. When the LEDs turn bright, you know you’re dead center and ready to start mixing your sessions or laying down tracks with the C Series.
Acoustic Control
Mixing doesn’t occur in a vacuum. Your listening environment influences your mixing decisions and, ultimately, the sound of your music. The C Series Acoustic Space Control, a series of calibration switches, helps provide optimal acoustic conditions for tracking, mixing, and monitoring anywhere. Adapt the C Series to any mixing environment—from bedrooms to basements to professional studios—without compromising frequency detail or stereo image. The result is a flexible monitoring setup for the most demanding mixing environments.
BX5D2 种类:双功放两分频基准监听音箱
低音单元:5.25英寸喇叭,带电磁屏蔽,填充了矿物质的聚丙烯锥体,耐高温的线圈和减震橡胶环
高音单元:1英寸喇叭,带电磁屏蔽,真丝球顶,内含铁质流体和减震机构
低音单元独立放大器功率:35W
高音单元独立放大器功率:35W
分频点:3kHz
输入口:卡侬式的平衡口,大三芯的平衡/非平衡口
输入灵敏度:85mV峰值声音的输入在音量旋钮打到最大时,能够在1米远的地方产生90dBA的最大声压值
输入阻抗:平衡口20k ohms,非平衡口10k ohms
保护装置:无线电波干扰保护,输出限流,高温保护,开/关瞬时保护,电源保险丝
信噪比> 100dB,全输出20kHz频宽时
频响范围:56Hz - 20kHz
信号灯:前面板上有电源开关指示灯
Model | BX5 D2 | BX8 D2 |
Type | 5" 2-way near-field studio reference monitors | 8" 2-way near-field studio reference monitors |
Frequency response | 48 Hz – 45 kHz | 42 Hz – 45 kHz |
Frequency range | 43Hz –45kHz | 37Hz –45KHz |
Amplifier power, rms | LF 35W HF 35W | LF 70W HF 60W |
Signal-to-Noise Ratio; | 100 dB typical A-weighted | > 100 dB typical A-weighted |
Crossover frequency | 2.8kHz | 2.2kHz |
LF Driver | 5-inch (127 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround. Magnetically shielded | 8-inch (203 mm) Kevlar curved cone with high temperature voicecoil and damped rubber surround, magnetically shieldedt |
HF Driver | 1-inch (25 mm) magnetically shielded natural silk dome | 1.25-inch (32mm) magnetically shielded natural silk dome |
Input Connectors | 1 x XLR balanced input connector/1 x TRS balanced/unbalanced input connector | 1 x XLR balanced input connector/1 x TRS balanced/unbalanced input connector |
Polarity | Positive signal at + input produce outward LF cone displacement | Positive signal at + input produce outward LF cone displacement |
Input Impedance | 20 KΩ balanced, 10 KΩ unbalanced | 20 KΩ balanced, 10 KΩ unbalanced |
Indicator | Power on/off indicator on rear panel | Power on/off indicator on rear panel |
Power Requirements | Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or100 V ~50/60 Hz | Factory-programmed for 115 V ~50/60 Hz, 230 V ~50/60 Hz, or100 V ~50/60 Hz |
Cabinet | Vinyl-laminated high-acoustic-efficiency MDF | Vinyl-laminated high-acoustic-efficiency MDF |
Dimension (W x D x H) | 176 mm x 200 mm x 250 mm | 254 mm x 305 mm x 381 mm |
Weight (without packing) | 5.0 kg* | 12.0kg* |